What makes a good concrete driveway?

Ready to switch to a concrete driveway? Well, that’s great. But there are some requirements that your concrete contractor has to meet to give you a long-lasting driveway. After all, the quality of concrete driveways largely depends on the materials used and the workmanship. To ensure that you get your money’s worth, here are features you should take note of to get a good concrete driveway. 

A good concrete driveway should also be cured properly. Curing is an important part of the process. Hence, Driveway Concrete Repair waverly ne can reduce the concrete’s resistance to the elements. It can also increase the risk of defects. Common curing methods include a continuous sprinkling of water, covering with curing blankets or plastic sheets, and many more.

2. The concrete should also be done at the right thickness. Thickness determines the strength and structure of concrete driveways. It is pertinent to have the concrete at a minimum thickness of 4 inches. When speaking with your concrete contractor, do well to suggest that the edges of the driveway are thickened by 1-2 inches for protection.

3. A good concrete driveway should also have the right reinforcement. Using steel reinforcement can uplift the structural strength of your driveway. This is especially great if there are going to be lots of cars coming in and going out. However, although reinforcement does not reduce the possibility of fractures, if they happen, it will help keep the driveway together. Typical reinforcement includes steel rebar 1⁄2-inch (# 4) or wire mesh. If your driveway is 4 to 5 inches thick, you can opt for wire mesh reinforcement. If it is 5 inches or above, rebar will do. 

4. A good driveway should also have proper drainage. If you do not want standing or stagnant water on your driveway, make sure it has proper drainage. If the contractor cannot construct drainage because the concrete slab is in between two structures, it is best to install a drain that can gather or divert water away. 

5. A good concrete driveway should also be cured properly. Curing is an important part of the process. Hence, failure to do this after finishing the concrete driveway can reduce the concrete’s resistance to the elements. It can also increase the risk of defects. Common curing methods include a continuous sprinkling of water, covering with curing blankets or plastic sheets, and many more.

In all, it is important that you discuss your options and needs with a concrete contractor to explore quality options. For more details, check out mud-setting agent for concrete overlays fl.